Marks Door Handle Set Marks 2750 Thinline Storm and Security Door Handle Set
Marks 2750 ThinLine Mortise Lever Lock set
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Marks Door Handle Set Marks 2750 Thinline Storm and Security Door Handle Set
Marks Door Handle Set Marks 2750 Thinline Storm and Security Door Handle Set
Marks 2750 ThinLine Mortise Lever Lock set
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern
Select COLOR
Select DOOR THICKNESS
Select KEYWAY OPTIONS
From $37.78
Original: $125.95
-70%Marks Door Handle Set Marks 2750 Thinline Storm and Security Door Handle Set—
$125.95
$37.78Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Marks 2750 ThinLine Mortise Lever Lock set
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern
Single Cylinder: Keyed on one side, thumbturn on the other
Keyway: Kwikset Standard (Marks "A", KW1) or Schlage (if you don't care, order Kwikset for quicker processing)
Lock Face Plate: 1 x 9-7/16 inches
Mounting screw holes spaced at 8-1/4 inches
Lock body: 3/4" wide x 6-7/8" tall
Backset: 1 inch
Fits: Doors with 1" (standard) or 1-3/4" thickness ( we stock Brass, Brushed Chrome and Oil Rubbed Brass) other finishes may be special order, and take 3-8 weeks; non-returnable)
Colors/Finishes Available:
Brushed/Satin Chrome (Handles, lock face and cylinder with thumbturn)
Polished Brass (Handles, lock face and cylinder with thumbturn)
Antique Brass (handles and lock face; key cylinder with thumbturn is satin brass)
Oil Rubbed Bronze (handles; key cylinder with thumbturn is satin brass; lock body faceplate is dull gold color)
Note: Key must be installed and turned to 11:00 or 1:00 position (depending on which side of the cylinder you're on) in order to remove and install cylinder.
To change the handing: Loosen screw on the back of the latch about 5 turns, pull out the latch and rotate 180 degrees and then put back in and tighten screw.
Related Marks Euro Cylinders
301099 - Schlage, Single Cylinder, SC1
301098 - Schlage, Double Cylinder, SC1
301097 - Kwikset, Single Cylinder, KW1
301096 - Kwikset, Double Cylinder, KW1
301059 - Marks Brand Slimline Lockset, 4 finishes, Keyed on Both Sides
301080 - CEL Brand Slimline 1 inch (25mm) Backset - Brass, Keyed on Both Sides
*Note: the CEL & Marks have different screw hole pattern